/*
* Copyright (c) 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
* 2018
* Jonathan Schleifer <js@heap.zone>
*
* All rights reserved.
*
* This file is part of ObjFW. It may be distributed under the terms of the
* Q Public License 1.0, which can be found in the file LICENSE.QPL included in
* the packaging of this file.
*
* Alternatively, it may be distributed under the terms of the GNU General
* Public License, either version 2 or 3, which can be found in the file
* LICENSE.GPLv2 or LICENSE.GPLv3 respectively included in the packaging of this
* file.
*/
#ifndef __STDC_LIMIT_MACROS
# define __STDC_LIMIT_MACROS
#endif
#ifndef __STDC_CONSTANT_MACROS
# define __STDC_CONSTANT_MACROS
#endif
#include <stdarg.h>
#import "OFObject.h"
#import "OFString.h"
#ifdef OF_HAVE_SOCKETS
# import "OFKernelEventObserver.h"
#endif
OF_ASSUME_NONNULL_BEGIN
/*! @file */
@class OFStream;
@class OFData;
#if defined(OF_HAVE_SOCKETS) && defined(OF_HAVE_BLOCKS)
/*!
* @brief A block which is called when data was read from the stream.
*
* @param stream The stream on which data was read
* @param buffer A buffer with the data that has been read
* @param length The length of the data that has been read
* @param exception An exception which occurred while reading or `nil` on
* success
* @return A bool whether the same block should be used for the next read
*/
typedef bool (^of_stream_async_read_block_t)(OFStream *stream, void *buffer,
size_t length, id _Nullable exception);
/*!
* @brief A block which is called when a line was read from the stream.
*
* @param stream The stream on which a line was read
* @param line The line which has been read or `nil` when the end of stream
* occurred
* @param exception An exception which occurred while reading or `nil` on
* success
* @return A bool whether the same block should be used for the next read
*/
typedef bool (^of_stream_async_read_line_block_t)(OFStream *stream,
OFString *_Nullable line, id _Nullable exception);
/*!
* @brief A block which is called when data was written to the stream.
*
* @param stream The stream to which data was written
* @param buffer A pointer to the buffer which was written to the stream. This
* can be changed to point to a different buffer to be used on the
* next write.
* @param bytesWritten The number of bytes which have been written. This
* matches the length specified on the asynchronous write
* if no exception was encountered.
* @param exception An exception which occurred while writing or `nil` on
* success
* @return The length to repeat the write with or 0 if it should not repeat.
* The buffer may be changed, so that every time a new buffer and length
* can be specified while the callback stays the same.
*/
typedef size_t (^of_stream_async_write_block_t)(OFStream *stream,
const void *_Nonnull *_Nonnull buffer, size_t bytesWritten,
id _Nullable exception);
#endif
/*!
* @class OFStream OFStream.h ObjFW/OFStream.h
*
* @brief A base class for different types of streams.
*
* @warning Even though the OFCopying protocol is implemented, it does *not*
* return an independent copy of the stream, but instead retains it.
* This is so that the stream can be used as a key for a dictionary,
* so context can be associated with a stream. Using a stream in more
* than one thread at the same time is not thread-safe, even if copy
* was called to create one "instance" for every thread!
*
* @note If you want to subclass this, override
* @ref lowlevelReadIntoBuffer:length:, @ref lowlevelWriteBuffer:length:
* and @ref lowlevelIsAtEndOfStream, but nothing else, as those are are
* the methods that do the actual work. OFStream uses those for all other
* methods and does all the caching and other stuff for you. If you
* override these methods without the `lowlevel` prefix, you *will* break
* caching and get broken results!
*/
@interface OFStream: OFObject <OFCopying>
{
#if !defined(OF_SEEKABLE_STREAM_M) && !defined(OF_TCP_SOCKET_M)
@private
#endif
char *_Nullable _readBuffer, *_Nullable _readBufferMemory;
char *_Nullable _writeBuffer;
size_t _readBufferLength, _writeBufferLength;
bool _writeBuffered, _waitingForDelimiter;
@protected
bool _blocking;
}
/*!
* @brief Whether the end of the stream has been reached.
*/
@property (readonly, nonatomic, getter=isAtEndOfStream) bool atEndOfStream;
/*!
* @brief Whether writes are buffered.
*/
@property (nonatomic, nonatomic, getter=isWriteBuffered) bool writeBuffered;
/*!
* @brief Whether data is present in the internal read buffer.
*/
@property (readonly, nonatomic) bool hasDataInReadBuffer;
/*!
* @brief Whether the stream is in blocking mode.
*
* By default, a stream is in blocking mode.
* On Win32, setting this currently only works for sockets!
*/
@property (readonly, nonatomic, getter=isBlocking) bool blocking;
/*!
* @brief Reads *at most* size bytes from the stream into a buffer.
*
* On network streams, this might read less than the specified number of bytes.
* If you want to read exactly the specified number of bytes, use
* @ref readIntoBuffer:exactLength:. Note that a read can even return 0 bytes -
* this does not necessarily mean that the stream ended, so you still need to
* check @ref atEndOfStream.
*
* @param buffer The buffer into which the data is read
* @param length The length of the data that should be read at most.
* The buffer *must* be *at least* this big!
* @return The number of bytes read
*/
- (size_t)readIntoBuffer: (void *)buffer
length: (size_t)length;
/*!
* @brief Reads exactly the specified length bytes from the stream into a
* buffer.
*
* Unlike @ref readIntoBuffer:length:, this method does not return when less
* than the specified length has been read - instead, it waits until it got
* exactly the specified length.
*
* @warning Only call this when you know that specified amount of data is
* available! Otherwise you will get an exception!
*
* @param buffer The buffer into which the data is read
* @param length The length of the data that should be read.
* The buffer *must* be *at least* this big!
*/
- (void)readIntoBuffer: (void *)buffer
exactLength: (size_t)length;
#ifdef OF_HAVE_SOCKETS
/*!
* @brief Asynchronously reads *at most* size bytes from the stream into a
* buffer.
*
* On network streams, this might read less than the specified number of bytes.
* If you want to read exactly the specified number of bytes, use
* @ref asyncReadIntoBuffer:exactLength:target:selector:context:. Note that a
* read can even return 0 bytes - this does not necessarily mean that the
* stream ended, so you still need to check @ref atEndOfStream.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param buffer The buffer into which the data is read.
* The buffer must not be freed before the async read completed!
* @param length The length of the data that should be read at most.
* The buffer *must* be *at least* this big!
* @param target The target on which the selector should be called when the
* data has been received. If the method returns true, it will be
* called again with the same buffer and maximum length when more
* data has been received. If you want the next method in the
* queue to handle the data received next, you need to return
* false from the method.
* @param selector The selector to call on the target. The signature must be
* `bool (OFStream *stream, void *buffer, size_t length,
* id context, id exception)`.
* @param context A context object to pass along to the target
*/
- (void)asyncReadIntoBuffer: (void *)buffer
length: (size_t)length
target: (id)target
selector: (SEL)selector
context: (nullable id)context;
/*!
* @brief Asynchronously reads exactly the specified length bytes from the
* stream into a buffer.
*
* Unlike @ref asyncReadIntoBuffer:length:target:selector:context:, this method
* does not call the method when less than the specified length has been read -
* instead, it waits until it got exactly the specified length, the stream has
* ended or an exception occurred.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param buffer The buffer into which the data is read
* @param length The length of the data that should be read.
* The buffer *must* be *at least* this big!
* @param target The target on which the selector should be called when the
* data has been received. If the method returns true, it will be
* called again with the same buffer and exact length when more
* data has been received. If you want the next method in the
* queue to handle the data received next, you need to return
* false from the method.
* @param selector The selector to call on the target. The signature must be
* `bool (OFStream *stream, void *buffer, size_t size,
* id context, id exception)`.
* @param context A context object to pass along to the target
*/
- (void)asyncReadIntoBuffer: (void *)buffer
exactLength: (size_t)length
target: (id)target
selector: (SEL)selector
context: (nullable id)context;
# ifdef OF_HAVE_BLOCKS
/*!
* @brief Asynchronously reads *at most* ref size bytes from the stream into a
* buffer.
*
* On network streams, this might read less than the specified number of bytes.
* If you want to read exactly the specified number of bytes, use
* @ref asyncReadIntoBuffer:exactLength:block:. Note that a read can even
* return 0 bytes - this does not necessarily mean that the stream ended, so
* you still need to check @ref atEndOfStream.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param buffer The buffer into which the data is read.
* The buffer must not be freed before the async read completed!
* @param length The length of the data that should be read at most.
* The buffer *must* be *at least* this big!
* @param block The block to call when the data has been received.
* If the block returns true, it will be called again with the same
* buffer and maximum length when more data has been received. If
* you want the next block in the queue to handle the data
* received next, you need to return false from the block.
*/
- (void)asyncReadIntoBuffer: (void *)buffer
length: (size_t)length
block: (of_stream_async_read_block_t)block;
/*!
* @brief Asynchronously reads exactly the specified length bytes from the
* stream into a buffer.
*
* Unlike @ref asyncReadIntoBuffer:length:block:, this method does not invoke
* the block when less than the specified length has been read - instead, it
* waits until it got exactly the specified length, the stream has ended or an
* exception occurred.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param buffer The buffer into which the data is read
* @param length The length of the data that should be read.
* The buffer *must* be *at least* this big!
* @param block The block to call when the data has been received.
* If the block returns true, it will be called again with the same
* buffer and exact length when more data has been received. If
* you want the next block in the queue to handle the data
* received next, you need to return false from the block.
*/
- (void)asyncReadIntoBuffer: (void *)buffer
exactLength: (size_t)length
block: (of_stream_async_read_block_t)block;
# endif
#endif
/*!
* @brief Reads a uint8_t from the stream.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A uint8_t from the stream
*/
- (uint8_t)readInt8;
/*!
* @brief Reads a uint16_t from the stream which is encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A uint16_t from the stream in native endianess
*/
- (uint16_t)readBigEndianInt16;
/*!
* @brief Reads a uint32_t from the stream which is encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A uint32_t from the stream in the native endianess
*/
- (uint32_t)readBigEndianInt32;
/*!
* @brief Reads a uint64_t from the stream which is encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A uint64_t from the stream in the native endianess
*/
- (uint64_t)readBigEndianInt64;
/*!
* @brief Reads a float from the stream which is encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A float from the stream in the native endianess
*/
- (float)readBigEndianFloat;
/*!
* @brief Reads a double from the stream which is encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A double from the stream in the native endianess
*/
- (double)readBigEndianDouble;
/*!
* @brief Reads the specified number of uint16_ts from the stream which are
* encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* uint16_ts
* @param count The number of uint16_ts to read
* @return The number of bytes read
*/
- (size_t)readBigEndianInt16sIntoBuffer: (uint16_t *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of uint32_ts from the stream which are
* encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* uint32_ts
* @param count The number of uint32_ts to read
* @return The number of bytes read
*/
- (size_t)readBigEndianInt32sIntoBuffer: (uint32_t *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of uint64_ts from the stream which are
* encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* uint64_ts
* @param count The number of uint64_ts to read
* @return The number of bytes read
*/
- (size_t)readBigEndianInt64sIntoBuffer: (uint64_t *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of floats from the stream which are encoded
* in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* floats
* @param count The number of floats to read
* @return The number of bytes read
*/
- (size_t)readBigEndianFloatsIntoBuffer: (float *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of doubles from the stream which are
* encoded in big endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* doubles
* @param count The number of doubles to read
* @return The number of bytes read
*/
- (size_t)readBigEndianDoublesIntoBuffer: (double *)buffer
count: (size_t)count;
/*!
* @brief Reads a uint16_t from the stream which is encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A uint16_t from the stream in native endianess
*/
- (uint16_t)readLittleEndianInt16;
/*!
* @brief Reads a uint32_t from the stream which is encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A uint32_t from the stream in the native endianess
*/
- (uint32_t)readLittleEndianInt32;
/*!
* @brief Reads a uint64_t from the stream which is encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A uint64_t from the stream in the native endianess
*/
- (uint64_t)readLittleEndianInt64;
/*!
* @brief Reads a float from the stream which is encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A float from the stream in the native endianess
*/
- (float)readLittleEndianFloat;
/*!
* @brief Reads a double from the stream which is encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @return A double from the stream in the native endianess
*/
- (double)readLittleEndianDouble;
/*!
* @brief Reads the specified number of uint16_ts from the stream which are
* encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* uint16_ts
* @param count The number of uint16_ts to read
* @return The number of bytes read
*/
- (size_t)readLittleEndianInt16sIntoBuffer: (uint16_t *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of uint32_ts from the stream which are
* encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* uint32_ts
* @param count The number of uint32_ts to read
* @return The number of bytes read
*/
- (size_t)readLittleEndianInt32sIntoBuffer: (uint32_t *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of uint64_ts from the stream which are
* encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* uint64_ts
* @param count The number of uint64_ts to read
* @return The number of bytes read
*/
- (size_t)readLittleEndianInt64sIntoBuffer: (uint64_t *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of floats from the stream which are
* encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* floats
* @param count The number of floats to read
* @return The number of bytes read
*/
- (size_t)readLittleEndianFloatsIntoBuffer: (float *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of doubles from the stream which are
* encoded in little endian.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param buffer A buffer of sufficient size to store the specified number of
* doubles
* @param count The number of doubles to read
* @return The number of bytes read
*/
- (size_t)readLittleEndianDoublesIntoBuffer: (double *)buffer
count: (size_t)count;
/*!
* @brief Reads the specified number of items with an item size of 1 from the
* stream and returns them as OFData.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param count The number of items to read
* @return OFData with count items.
*/
- (OFData *)readDataWithCount: (size_t)count;
/*!
* @brief Reads the specified number of items with the specified item size from
* the stream and returns them as OFData.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param itemSize The size of each item
* @param count The number of items to read
* @return OFData with count items.
*/
- (OFData *)readDataWithItemSize: (size_t)itemSize
count: (size_t)count;
/*!
* @brief Returns OFData with all the remaining data of the stream.
*
* @return OFData with an item size of 1 with all the data of the stream until
* the end of the stream is reached.
*/
- (OFData *)readDataUntilEndOfStream;
/*!
* @brief Reads a string with the specified length from the stream.
*
* If `\0` appears in the stream, the string will be truncated at the `\0` and
* the rest of the bytes of the string will be lost. This way, reading from the
* stream will not break because of a `\0` because the specified number of
* bytes is still being read and only the string gets truncated.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param length The length (in bytes) of the string to read from the stream
* @return A string with the specified length
*/
- (OFString *)readStringWithLength: (size_t)length;
/*!
* @brief Reads a string with the specified encoding and length from the stream.
*
* If a `\0` appears in the stream, the string will be truncated at the `\0`
* and the rest of the bytes of the string will be lost. This way, reading from
* the stream will not break because of a `\0` because the specified number of
* bytes is still being read and only the string gets truncated.
*
* @warning Only call this when you know that enough data is available!
* Otherwise you will get an exception!
*
* @param encoding The encoding of the string to read from the stream
* @param length The length (in bytes) of the string to read from the stream
* @return A string with the specified length
*/
- (OFString *)readStringWithLength: (size_t)length
encoding: (of_string_encoding_t)encoding;
/*!
* @brief Reads until a newline, `\0` or end of stream occurs.
*
* @return The line that was read, autoreleased, or `nil` if the end of the
* stream has been reached.
*/
- (nullable OFString *)readLine;
/*!
* @brief Reads with the specified encoding until a newline, `\0` or end of
* stream occurs.
*
* @param encoding The encoding used by the stream
* @return The line that was read, autoreleased, or `nil` if the end of the
* stream has been reached.
*/
- (nullable OFString *)readLineWithEncoding: (of_string_encoding_t)encoding;
#ifdef OF_HAVE_SOCKETS
/*!
* @brief Asynchronously reads until a newline, `\0`, end of stream or an
* exception occurs.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param target The target on which to call the selector when the data has
* been received. If the method returns true, it will be called
* again when the next line has been received. If you want the
* next method in the queue to handle the next line, you need to
* return false from the method
* @param selector The selector to call on the target. The signature must be
* `bool (OFStream *stream, OFString *line, id context,
* id exception)`.
* @param context A context object to pass along to the target
*/
- (void)asyncReadLineWithTarget: (id)target
selector: (SEL)selector
context: (nullable id)context;
/*!
* @brief Asynchronously reads with the specified encoding until a newline,
* `\0`, end of stream or an exception occurs.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param encoding The encoding used by the stream
* @param target The target on which to call the selector when the data has
* been received. If the method returns true, it will be called
* again when the next line has been received. If you want the
* next method in the queue to handle the next line, you need to
* return false from the method
* @param selector The selector to call on the target. The signature must be
* `bool (OFStream *stream, OFString *line, id context,
* id exception)`.
* @param context A context object to pass along to the target
*/
- (void)asyncReadLineWithEncoding: (of_string_encoding_t)encoding
target: (id)target
selector: (SEL)selector
context: (nullable id)context;
# ifdef OF_HAVE_BLOCKS
/*!
* @brief Asynchronously reads until a newline, `\0`, end of stream or an
* exception occurs.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param block The block to call when the data has been received.
* If the block returns true, it will be called again when the next
* line has been received. If you want the next block in the queue
* to handle the next line, you need to return false from the
* block.
*/
- (void)asyncReadLineWithBlock: (of_stream_async_read_line_block_t)block;
/*!
* @brief Asynchronously reads with the specified encoding until a newline,
* `\0`, end of stream or an exception occurs.
*
* @note The stream must conform to @ref OFReadyForReadingObserving in order
* for this to work!
*
* @param encoding The encoding used by the stream
* @param block The block to call when the data has been received.
* If the block returns true, it will be called again when the next
* line has been received. If you want the next block in the queue
* to handle the next line, you need to return false from the
* block.
*/
- (void)asyncReadLineWithEncoding: (of_string_encoding_t)encoding
block: (of_stream_async_read_line_block_t)block;
# endif
#endif
/*!
* @brief Tries to read a line from the stream (see @ref readLine) and returns
* `nil` if no complete line has been received yet.
*
* @return The line that was read, autoreleased, or `nil` if the line is not
* complete yet
*/
- (nullable OFString *)tryReadLine;
/*!
* @brief Tries to read a line from the stream with the specified encoding (see
* @ref readLineWithEncoding:) and returns `nil` if no complete line has
* been received yet.
*
* @param encoding The encoding used by the stream
* @return The line that was read, autoreleased, or `nil` if the line is not
* complete yet
*/
- (nullable OFString *)tryReadLineWithEncoding: (of_string_encoding_t)encoding;
/*!
* @brief Reads until the specified string or `\0` is found or the end of
* stream occurs.
*
* @param delimiter The delimiter
* @return The line that was read, autoreleased, or `nil` if the end of the
* stream has been reached.
*/
- (nullable OFString *)readTillDelimiter: (OFString *)delimiter;
/*!
* @brief Reads until the specified string or `\0` is found or the end of
* stream occurs.
*
* @param delimiter The delimiter
* @param encoding The encoding used by the stream
* @return The line that was read, autoreleased, or `nil` if the end of the
* stream has been reached.
*/
- (nullable OFString *)readTillDelimiter: (OFString *)delimiter
encoding: (of_string_encoding_t)encoding;
/*!
* @brief Tries to reads until the specified string or `\0` is found or the end
* of stream (see @ref readTillDelimiter:) and returns `nil` if not
* enough data has been received yet.
*
* @param delimiter The delimiter
* @return The line that was read, autoreleased, or `nil` if the end of the
* stream has been reached.
*/
- (nullable OFString *)tryReadTillDelimiter: (OFString *)delimiter;
/*!
* @brief Tries to read until the specified string or `\0` is found or the end
* of stream occurs (see @ref readTillDelimiter:encoding:) and returns
* `nil` if not enough data has been received yet.
*
* @param delimiter The delimiter
* @param encoding The encoding used by the stream
* @return The line that was read, autoreleased, or `nil` if the end of the
* stream has been reached.
*/
- (nullable OFString *)tryReadTillDelimiter: (OFString *)delimiter
encoding: (of_string_encoding_t)encoding;
/*!
* @brief Writes everything in the write buffer to the stream.
*/
- (void)flushWriteBuffer;
/*!
* @brief Writes from a buffer into the stream.
*
* @param buffer The buffer from which the data is written into the stream
* @param length The length of the data that should be written
* @return The number of bytes written. This can only differ from the specified
* length in non-blocking mode.
*/
- (size_t)writeBuffer: (const void *)buffer
length: (size_t)length;
#ifdef OF_HAVE_SOCKETS
/*!
* @brief Asynchronously writes a buffer into the stream.
*
* @note The stream must conform to @ref OFReadyForWritingObserving in order
* for this to work!
*
* @param buffer The buffer from which the data is written into the stream. The
* buffer needs to be valid until the write request is completed!
* @param length The length of the data that should be written
* @param target The target on which the selector should be called when the
* data has been written. The method should return the length for
* the next write with the same callback or 0 if it should not
* repeat. The buffer may be changed, so that every time a new
* buffer and length can be specified while the callback stays
* the same.
* @param selector The selector to call on the target. It should return the
* length for the next write with the same callback or 0 if it
* should not repeat. The signature must be `size_t (OFStream
* *stream, const void *buffer, size_t bytesWritten, id
* context, id exception)`.
* @param context A context object to pass along to the target
*/
- (void)asyncWriteBuffer: (const void *)buffer
length: (size_t)length
target: (id)target
selector: (SEL)selector
context: (nullable id)context;
# ifdef OF_HAVE_BLOCKS
/*!
* @brief Asynchronously writes a buffer into the stream.
*
* @note The stream must conform to @ref OFReadyForWritingObserving in order
* for this to work!
*
* @param buffer The buffer from which the data is written into the stream. The
* buffer needs to be valid until the write request is completed!
* @param length The length of the data that should be written
* @param block The block to call when the data has been written. It should
* return the length for the next write with the same callback or
* 0 if it should not repeat. The buffer may be changed, so that
* every time a new buffer and length can be specified while the
* callback stays the same.
*/
- (void)asyncWriteBuffer: (const void *)buffer
length: (size_t)length
block: (of_stream_async_write_block_t)block;
# endif
#endif
/*!
* @brief Writes a uint8_t into the stream.
*
* @param int8 A uint8_t
*/
- (void)writeInt8: (uint8_t)int8;
/*!
* @brief Writes a uint16_t into the stream, encoded in big endian.
*
* @param int16 A uint16_t
*/
- (void)writeBigEndianInt16: (uint16_t)int16;
/*!
* @brief Writes a uint32_t into the stream, encoded in big endian.
*
* @param int32 A uint32_t
*/
- (void)writeBigEndianInt32: (uint32_t)int32;
/*!
* @brief Writes a uint64_t into the stream, encoded in big endian.
*
* @param int64 A uint64_t
*/
- (void)writeBigEndianInt64: (uint64_t)int64;
/*!
* @brief Writes a float into the stream, encoded in big endian.
*
* @param float_ A float
*/
- (void)writeBigEndianFloat: (float)float_;
/*!
* @brief Writes a double into the stream, encoded in big endian.
*
* @param double_ A double
*/
- (void)writeBigEndianDouble: (double)double_;
/*!
* @brief Writes the specified number of uint16_ts into the stream, encoded in
* big endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of uint16_ts to write
* @return The number of bytes written to the stream
*/
- (size_t)writeBigEndianInt16s: (const uint16_t *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of uint32_ts into the stream, encoded in
* big endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of uint32_ts to write
* @return The number of bytes written to the stream
*/
- (size_t)writeBigEndianInt32s: (const uint32_t *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of uint64_ts into the stream, encoded in
* big endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of uint64_ts to write
* @return The number of bytes written to the stream
*/
- (size_t)writeBigEndianInt64s: (const uint64_t *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of floats into the stream, encoded in big
* endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of floats to write
* @return The number of bytes written to the stream
*/
- (size_t)writeBigEndianFloats: (const float *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of doubles into the stream, encoded in
* big endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of doubles to write
* @return The number of bytes written to the stream
*/
- (size_t)writeBigEndianDoubles: (const double *)buffer
count: (size_t)count;
/*!
* @brief Writes a uint16_t into the stream, encoded in little endian.
*
* @param int16 A uint16_t
*/
- (void)writeLittleEndianInt16: (uint16_t)int16;
/*!
* @brief Writes a uint32_t into the stream, encoded in little endian.
*
* @param int32 A uint32_t
*/
- (void)writeLittleEndianInt32: (uint32_t)int32;
/*!
* @brief Writes a uint64_t into the stream, encoded in little endian.
*
* @param int64 A uint64_t
*/
- (void)writeLittleEndianInt64: (uint64_t)int64;
/*!
* @brief Writes a float into the stream, encoded in little endian.
*
* @param float_ A float
*/
- (void)writeLittleEndianFloat: (float)float_;
/*!
* @brief Writes a double into the stream, encoded in little endian.
*
* @param double_ A double
*/
- (void)writeLittleEndianDouble: (double)double_;
/*!
* @brief Writes the specified number of uint16_ts into the stream, encoded in
* little endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of uint16_ts to write
* @return The number of bytes written to the stream
*/
- (size_t)writeLittleEndianInt16s: (const uint16_t *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of uint32_ts into the stream, encoded in
* little endian.
*
* @param count The number of uint32_ts to write
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @return The number of bytes written to the stream
*/
- (size_t)writeLittleEndianInt32s: (const uint32_t *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of uint64_ts into the stream, encoded in
* little endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of uint64_ts to write
* @return The number of bytes written to the stream
*/
- (size_t)writeLittleEndianInt64s: (const uint64_t *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of floats into the stream, encoded in
* little endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of floats to write
* @return The number of bytes written to the stream
*/
- (size_t)writeLittleEndianFloats: (const float *)buffer
count: (size_t)count;
/*!
* @brief Writes the specified number of doubles into the stream, encoded in
* little endian.
*
* @param buffer The buffer from which the data is written to the stream after
* it has been byte swapped if necessary
* @param count The number of doubles to write
* @return The number of bytes written to the stream
*/
- (size_t)writeLittleEndianDoubles: (const double *)buffer
count: (size_t)count;
/*!
* @brief Writes OFData into the stream.
*
* @param data The OFData to write into the stream
* @return The number of bytes written
*/
- (size_t)writeData: (OFData *)data;
/*!
* @brief Writes a string into the stream, without the trailing zero.
*
* @param string The string from which the data is written to the stream
* @return The number of bytes written
*/
- (size_t)writeString: (OFString *)string;
/*!
* @brief Writes a string into the stream in the specified encoding, without
* the trailing zero.
*
* @param string The string from which the data is written to the stream
* @param encoding The encoding in which to write the string to the stream
* @return The number of bytes written
*/
- (size_t)writeString: (OFString *)string
encoding: (of_string_encoding_t)encoding;
/*!
* @brief Writes a string into the stream with a trailing newline.
*
* @param string The string from which the data is written to the stream
* @return The number of bytes written
*/
- (size_t)writeLine: (OFString *)string;
/*!
* @brief Writes a string into the stream in the specified encoding with a
* trailing newline.
*
* @param string The string from which the data is written to the stream
* @param encoding The encoding in which to write the string to the stream
* @return The number of bytes written
*/
- (size_t)writeLine: (OFString *)string
encoding: (of_string_encoding_t)encoding;
/*!
* @brief Writes a formatted string into the stream.
*
* See printf for the format syntax. As an addition, `%@` is available as
* format specifier for objects, `%C` for `of_unichar_t` and `%S` for
* `const of_unichar_t *`.
*
* @param format A string used as format
* @return The number of bytes written
*/
- (size_t)writeFormat: (OFConstantString *)format, ...;
/*!
* @brief Writes a formatted string into the stream.
*
* See printf for the format syntax. As an addition, `%@` is available as
* format specifier for objects, `%C` for `of_unichar_t` and `%S` for
* `const of_unichar_t *`.
*
* @param format A string used as format
* @param arguments The arguments used in the format string
* @return The number of bytes written
*/
- (size_t)writeFormat: (OFConstantString *)format
arguments: (va_list)arguments;
#ifdef OF_HAVE_SOCKETS
/*!
* @brief Cancels all pending asynchronous requests on the stream.
*/
- (void)cancelAsyncRequests;
#endif
/*!
* @brief "Reverses" a read operation, meaning the bytes from the specified
* buffer will be returned on the next read operation.
*
* This is useful for reading into a buffer, parsing the data and then giving
* back the data which does not need to be processed. This can be used to
* optimize situations in which the length of the data that needs to be
* processed is not known before all data has been processed - for example in
* decompression - in which it would otherwise be necessary to read byte by
* byte to avoid consuming bytes that need to be parsed by something else -
* for example the data descriptor in a ZIP archive which immediately follows
* the compressed data.
*
* If the stream is a file, this method does not change any data in the file.
*
* If the stream is seekable, a seek operation will discard any data which was
* unread.
*
* @param buffer The buffer to unread
* @param length The length of the buffer to unread
*/
- (void)unreadFromBuffer: (const void *)buffer
length: (size_t)length;
/*!
* @brief Closes the stream.
*
* @note If you override this, make sure to call `[super close]`!
*/
- (void)close;
/*!
* @brief Performs a lowlevel read.
*
* @warning Do not call this directly!
*
* @note Override this method with your actual read implementation when
* subclassing!
*
* @param buffer The buffer for the data to read
* @param length The length of the buffer
* @return The number of bytes read
*/
- (size_t)lowlevelReadIntoBuffer: (void *)buffer
length: (size_t)length;
/*!
* @brief Performs a lowlevel write.
*
* @warning Do not call this directly!
*
* @note Override this method with your actual write implementation when
* subclassing!
*
* @param buffer The buffer with the data to write
* @param length The length of the data to write
* @return The number of bytes written
*/
- (size_t)lowlevelWriteBuffer: (const void *)buffer
length: (size_t)length;
/*!
* @brief Returns whether the lowlevel is at the end of the stream.
*
* @warning Do not call this directly!
*
* @note Override this method with your actual end of stream checking
* implementation when subclassing!
*
* @return Whether the lowlevel is at the end of the stream
*/
- (bool)lowlevelIsAtEndOfStream;
@end
OF_ASSUME_NONNULL_END