ObjFW  Diff

 * result of 0 bytes.
 *
 * @param buffer The buffer into which the data is read
 * @param length The length of the data that should be read at most.
 *		 The buffer *must* be *at least* this big!
 * @return The number of bytes read
 */
- (size_t)readIntoBuffer: (void *)buffer
- (size_t)readIntoBuffer: (void *)buffer length: (size_t)length;
		  length: (size_t)length;

/**
 * @brief Reads exactly the specified length bytes from the stream into a
 *	  buffer.
 *
 * Unlike @ref readIntoBuffer:length:, this method does not return when less
 * than the specified length has been read - instead, it waits until it got
 * exactly the specified length.
 *
 * @warning Only call this when you know that specified amount of data is
 *	    available! Otherwise you will get an exception!
 *
 * @param buffer The buffer into which the data is read
 * @param length The length of the data that should be read.
 *		 The buffer *must* be *at least* this big!
 */
 - (void)readIntoBuffer: (void *)buffer
 - (void)readIntoBuffer: (void *)buffer exactLength: (size_t)length;
	    exactLength: (size_t)length;

#ifdef OF_HAVE_SOCKETS
/**
 * @brief Asynchronously reads *at most* size bytes from the stream into a
 *	  buffer.
 *
 * On network streams, this might read less than the specified number of bytes.

 *	 for this to work!
 *
 * @param buffer The buffer into which the data is read.
 *		 The buffer must not be freed before the async read completed!
 * @param length The length of the data that should be read at most.
 *		 The buffer *must* be *at least* this big!
 */
- (void)asyncReadIntoBuffer: (void *)buffer
- (void)asyncReadIntoBuffer: (void *)buffer length: (size_t)length;
		     length: (size_t)length;

/**
 * @brief Asynchronously reads *at most* size bytes from the stream into a
 *	  buffer.
 *
 * On network streams, this might read less than the specified number of bytes.
 * If you want to read exactly the specified number of bytes, use

 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param buffer The buffer into which the data is read
 * @param length The length of the data that should be read.
 *		 The buffer *must* be *at least* this big!
 */
- (void)asyncReadIntoBuffer: (void *)buffer
- (void)asyncReadIntoBuffer: (void *)buffer exactLength: (size_t)length;
		exactLength: (size_t)length;

/**
 * @brief Asynchronously reads exactly the specified length bytes from the
 *	  stream into a buffer.
 *
 * Unlike @ref asyncReadIntoBuffer:length:, this method does not call the
 * method when less than the specified length has been read - instead, it waits

 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 floats
 * @param count The number of floats to read
 * @return The number of bytes read
 */
- (size_t)readBigEndianFloatsIntoBuffer: (float *)buffer
- (size_t)readBigEndianFloatsIntoBuffer: (float *)buffer count: (size_t)count;
				  count: (size_t)count;

/**
 * @brief Reads the specified number of doubles from the stream which are
 *	  encoded in big endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 doubles
 * @param count The number of doubles to read
 * @return The number of bytes read
 */
- (size_t)readBigEndianDoublesIntoBuffer: (double *)buffer
- (size_t)readBigEndianDoublesIntoBuffer: (double *)buffer count: (size_t)count;
				   count: (size_t)count;

/**
 * @brief Reads a uint16_t from the stream which is encoded in little endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *

 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param itemSize The size of each item
 * @param count The number of items to read
 * @return OFData with count items.
 */
- (OFData *)readDataWithItemSize: (size_t)itemSize
- (OFData *)readDataWithItemSize: (size_t)itemSize count: (size_t)count;
			   count: (size_t)count;

/**
 * @brief Returns OFData with all the remaining data of the stream.
 *
 * @return OFData with an item size of 1 with all the data of the stream until
 *	   the end of the stream is reached.
 */

 * @brief Writes from a buffer into the stream.
 *
 * @param buffer The buffer from which the data is written into the stream
 * @param length The length of the data that should be written
 * @return The number of bytes written. This can only differ from the specified
 *	   length in non-blocking mode.
 */
- (size_t)writeBuffer: (const void *)buffer
- (size_t)writeBuffer: (const void *)buffer length: (size_t)length;
	       length: (size_t)length;

#ifdef OF_HAVE_SOCKETS
/**
 * @brief Asynchronously writes data into the stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!

 *	  big endian.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint16_ts to write
 * @return The number of bytes written to the stream
 */
- (size_t)writeBigEndianInt16s: (const uint16_t *)buffer
- (size_t)writeBigEndianInt16s: (const uint16_t *)buffer count: (size_t)count;
			 count: (size_t)count;

/**
 * @brief Writes the specified number of uint32_ts into the stream, encoded in
 *	  big endian.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint32_ts to write
 * @return The number of bytes written to the stream
 */
- (size_t)writeBigEndianInt32s: (const uint32_t *)buffer
- (size_t)writeBigEndianInt32s: (const uint32_t *)buffer count: (size_t)count;
			 count: (size_t)count;

/**
 * @brief Writes the specified number of uint64_ts into the stream, encoded in
 *	  big endian.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint64_ts to write
 * @return The number of bytes written to the stream
 */
- (size_t)writeBigEndianInt64s: (const uint64_t *)buffer
- (size_t)writeBigEndianInt64s: (const uint64_t *)buffer count: (size_t)count;
			 count: (size_t)count;

/**
 * @brief Writes the specified number of floats into the stream, encoded in big
 *	  endian.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of floats to write
 * @return The number of bytes written to the stream
 */
- (size_t)writeBigEndianFloats: (const float *)buffer
- (size_t)writeBigEndianFloats: (const float *)buffer count: (size_t)count;
			 count: (size_t)count;

/**
 * @brief Writes the specified number of doubles into the stream, encoded in
 *	  big endian.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of doubles to write
 * @return The number of bytes written to the stream
 */
- (size_t)writeBigEndianDoubles: (const double *)buffer
- (size_t)writeBigEndianDoubles: (const double *)buffer count: (size_t)count;
			  count: (size_t)count;

/**
 * @brief Writes a uint16_t into the stream, encoded in little endian.
 *
 * @param int16 A uint16_t
 */
- (void)writeLittleEndianInt16: (uint16_t)int16;

 *	  little endian.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of floats to write
 * @return The number of bytes written to the stream
 */
- (size_t)writeLittleEndianFloats: (const float *)buffer
- (size_t)writeLittleEndianFloats: (const float *)buffer count: (size_t)count;
			    count: (size_t)count;

/**
 * @brief Writes the specified number of doubles into the stream, encoded in
 *	  little endian.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of doubles to write
 * @return The number of bytes written to the stream
 */
- (size_t)writeLittleEndianDoubles: (const double *)buffer
- (size_t)writeLittleEndianDoubles: (const double *)buffer count: (size_t)count;
			     count: (size_t)count;

/**
 * @brief Writes OFData into the stream.
 *
 * @param data The OFData to write into the stream
 * @return The number of bytes written
 */

 * format specifier for objects, `%C` for `of_unichar_t` and `%S` for
 * `const of_unichar_t *`.
 *
 * @param format A string used as format
 * @param arguments The arguments used in the format string
 * @return The number of bytes written
 */
- (size_t)writeFormat: (OFConstantString *)format
- (size_t)writeFormat: (OFConstantString *)format arguments: (va_list)arguments;
	    arguments: (va_list)arguments;

#ifdef OF_HAVE_SOCKETS
/**
 * @brief Cancels all pending asynchronous requests on the stream.
 */
- (void)cancelAsyncRequests;
#endif

 *
 * If the stream is seekable, a seek operation will discard any data which was
 * unread.
 *
 * @param buffer The buffer to unread
 * @param length The length of the buffer to unread
 */
- (void)unreadFromBuffer: (const void *)buffer
- (void)unreadFromBuffer: (const void *)buffer length: (size_t)length;
		  length: (size_t)length;

/**
 * @brief Closes the stream.
 *
 * @note If you override this, make sure to call `[super close]`!
 */
- (void)close;

/**
 * @brief Performs a lowlevel read.
 *
 * @warning Do not call this directly!
 *
 * @note Override this method with your actual read implementation when
 *	 subclassing!
 *
 * @param buffer The buffer for the data to read
 * @param length The length of the buffer
 * @return The number of bytes read
 */
- (size_t)lowlevelReadIntoBuffer: (void *)buffer
- (size_t)lowlevelReadIntoBuffer: (void *)buffer length: (size_t)length;
			  length: (size_t)length;

/**
 * @brief Performs a lowlevel write.
 *
 * @warning Do not call this directly!
 *
 * @note Override this method with your actual write implementation when
 *	 subclassing!
 *
 * @param buffer The buffer with the data to write
 * @param length The length of the data to write
 * @return The number of bytes written
 */
- (size_t)lowlevelWriteBuffer: (const void *)buffer
- (size_t)lowlevelWriteBuffer: (const void *)buffer length: (size_t)length;
		       length: (size_t)length;

/**
 * @brief Returns whether the lowlevel is at the end of the stream.
 *
 * @warning Do not call this directly!
 *
 * @note Override this method with your actual end of stream checking