ObjFW  Diff

 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @return A double from the stream in the native endianess
 */
- (double)readBigEndianDouble;

/**
 * @brief Reads the specified number of uint16_ts from the stream which are
 *	  encoded in big endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 uint16_ts
 * @param count The number of uint16_ts to read
 * @return The number of bytes read
 */
- (size_t)readBigEndianInt16sIntoBuffer: (uint16_t *)buffer
				  count: (size_t)count;

/**
 * @brief Reads the specified number of uint32_ts from the stream which are
 *	  encoded in big endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 uint32_ts
 * @param count The number of uint32_ts to read
 * @return The number of bytes read
 */
- (size_t)readBigEndianInt32sIntoBuffer: (uint32_t *)buffer
				  count: (size_t)count;

/**
 * @brief Reads the specified number of uint64_ts from the stream which are
 *	  encoded in big endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 uint64_ts
 * @param count The number of uint64_ts to read
 * @return The number of bytes read
 */
- (size_t)readBigEndianInt64sIntoBuffer: (uint64_t *)buffer
				  count: (size_t)count;

/**
 * @brief Reads the specified number of floats from the stream which are encoded
 *	  in big endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 floats
 * @param count The number of floats to read
 * @return The number of bytes read
 */
- (size_t)readBigEndianFloatsIntoBuffer: (float *)buffer count: (size_t)count;

/**
 * @brief Reads the specified number of doubles from the stream which are
 *	  encoded in big endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 doubles
 * @param count The number of doubles to read
 * @return The number of bytes read
 */
- (size_t)readBigEndianDoublesIntoBuffer: (double *)buffer count: (size_t)count;

/**
 * @brief Reads a uint16_t from the stream which is encoded in little endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @return A uint16_t from the stream in native endianess

 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @return A double from the stream in the native endianess
 */
- (double)readLittleEndianDouble;

/**
 * @brief Reads the specified number of uint16_ts from the stream which are
 *	  encoded in little endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 uint16_ts
 * @param count The number of uint16_ts to read
 * @return The number of bytes read
 */
- (size_t)readLittleEndianInt16sIntoBuffer: (uint16_t *)buffer
				     count: (size_t)count;

/**
 * @brief Reads the specified number of uint32_ts from the stream which are
 *	  encoded in little endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 uint32_ts
 * @param count The number of uint32_ts to read
 * @return The number of bytes read
 */
- (size_t)readLittleEndianInt32sIntoBuffer: (uint32_t *)buffer
				     count: (size_t)count;

/**
 * @brief Reads the specified number of uint64_ts from the stream which are
 *	  encoded in little endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 uint64_ts
 * @param count The number of uint64_ts to read
 * @return The number of bytes read
 */
- (size_t)readLittleEndianInt64sIntoBuffer: (uint64_t *)buffer
				     count: (size_t)count;

/**
 * @brief Reads the specified number of floats from the stream which are
 *	  encoded in little endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 floats
 * @param count The number of floats to read
 * @return The number of bytes read
 */
- (size_t)readLittleEndianFloatsIntoBuffer: (float *)buffer
				     count: (size_t)count;

/**
 * @brief Reads the specified number of doubles from the stream which are
 *	  encoded in little endian.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *
 * @param buffer A buffer of sufficient size to store the specified number of
 *		 doubles
 * @param count The number of doubles to read
 * @return The number of bytes read
 */
- (size_t)readLittleEndianDoublesIntoBuffer: (double *)buffer
				      count: (size_t)count;

/**
 * @brief Reads the specified number of items with an item size of 1 from the
 *	  stream and returns them as OFData.
 *
 * @warning Only call this when you know that enough data is available!
 *	    Otherwise you will get an exception!
 *

 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param double_ A double
 */
- (void)writeBigEndianDouble: (double)double_;

/**
 * @brief Writes the specified number of uint16_ts into the stream, encoded in
 *	  big endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint16_ts to write
 */
- (void)writeBigEndianInt16s: (const uint16_t *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of uint32_ts into the stream, encoded in
 *	  big endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint32_ts to write
 */
- (void)writeBigEndianInt32s: (const uint32_t *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of uint64_ts into the stream, encoded in
 *	  big endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint64_ts to write
 */
- (void)writeBigEndianInt64s: (const uint64_t *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of floats into the stream, encoded in big
 *	  endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of floats to write
 */
- (void)writeBigEndianFloats: (const float *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of doubles into the stream, encoded in
 *	  big endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of doubles to write
 */
- (void)writeBigEndianDoubles: (const double *)buffer count: (size_t)count;

/**
 * @brief Writes a uint16_t into the stream, encoded in little endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param int16 A uint16_t
 */

 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param double_ A double
 */
- (void)writeLittleEndianDouble: (double)double_;

/**
 * @brief Writes the specified number of uint16_ts into the stream, encoded in
 *	  little endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint16_ts to write
 */
- (void)writeLittleEndianInt16s: (const uint16_t *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of uint32_ts into the stream, encoded in
 *	  little endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param count The number of uint32_ts to write
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 */
- (void)writeLittleEndianInt32s: (const uint32_t *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of uint64_ts into the stream, encoded in
 *	  little endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of uint64_ts to write
 */
- (void)writeLittleEndianInt64s: (const uint64_t *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of floats into the stream, encoded in
 *	  little endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of floats to write
 */
- (void)writeLittleEndianFloats: (const float *)buffer count: (size_t)count;

/**
 * @brief Writes the specified number of doubles into the stream, encoded in
 *	  little endian.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param buffer The buffer from which the data is written to the stream after
 *		 it has been byte swapped if necessary
 * @param count The number of doubles to write
 */
- (void)writeLittleEndianDoubles: (const double *)buffer count: (size_t)count;

/**
 * @brief Writes OFData into the stream.
 *
 * In non-blocking mode, the behavior is the same as @ref writeBuffer:length:.
 *
 * @param data The OFData to write into the stream
 */