ObjFW  Diff

 *	  stream.
 *
 * @param length The length of the data that has been read
 * @param exception An exception which occurred while reading or `nil` on
 *		    success
 * @return A bool whether the same block should be used for the next read
 */
typedef bool (^of_stream_async_read_block_t)(size_t length,
    id _Nullable exception);

/**
 * @brief A block which is called when a line was read asynchronously from a
 *	  stream.
 *
 * @param line The line which has been read or `nil` when the end of stream
 *	       occurred
 * @param exception An exception which occurred while reading or `nil` on
 *		    success
 * @return A bool whether the same block should be used for the next read
 */
typedef bool (^of_stream_async_read_line_block_t)(OFString *_Nullable line,
    id _Nullable exception);

/**
 * @brief A block which is called when data was written asynchronously to a
 *	  stream.
 *
 * @param data The data which was written to the stream
 * @param bytesWritten The number of bytes which have been written. This
 *		       matches the length of the specified data on the
 *		       asynchronous write if no exception was encountered.
 * @param exception An exception which occurred while writing or `nil` on
 *		    success
 * @return The data to repeat the write with or nil if it should not repeat
 */
typedef OFData *_Nullable (^of_stream_async_write_data_block_t)(
    OFData *_Nonnull data, size_t bytesWritten, id _Nullable exception);

/**
 * @brief A block which is called when a string was written asynchronously to a
 *	  stream.
 *
 * @param string The string which was written to the stream
 * @param bytesWritten The number of bytes which have been written. This
 *		       matches the length of the specified data on the
 *		       asynchronous write if no exception was encountered.
 * @param exception An exception which occurred while writing or `nil` on
 *		    success
 * @return The string to repeat the write with or nil if it should not repeat
 */
typedef OFString *_Nullable (^of_stream_async_write_string_block_t)(
    OFString *_Nonnull string, size_t bytesWritten, id _Nullable exception);
#endif

/**
 * @protocol OFStreamDelegate OFStream.h ObjFW/OFStream.h
 *
 * A delegate for OFStream.

 *		       matches the length of the specified data on the
 *		       asynchronous write if no exception was encountered.
 * @param exception An exception that occurred while writing, or nil on success
 * @return The string to repeat the write with or nil if it should not repeat
 */
- (nullable OFString *)stream: (OFStream *)stream
	       didWriteString: (OFString *)string
		     encoding: (of_string_encoding_t)encoding
		 bytesWritten: (size_t)bytesWritten
		    exception: (nullable id)exception;
@end

/**
 * @class OFStream OFStream.h ObjFW/OFStream.h
 *

 *		 The buffer must not be freed before the async read completed!
 * @param length The length of the data that should be read at most.
 *		 The buffer *must* be *at least* this big!
 * @param runLoopMode The run loop mode in which to perform the async read
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		     length: (size_t)length
		runLoopMode: (of_run_loop_mode_t)runLoopMode;

/**
 * @brief Asynchronously reads exactly the specified length bytes from the
 *	  stream into a buffer.
 *
 * Unlike @ref asyncReadIntoBuffer:length:, this method does not call the
 * method when less than the specified length has been read - instead, it waits

 * @param buffer The buffer into which the data is read
 * @param length The length of the data that should be read.
 *		 The buffer *must* be *at least* this big!
 * @param runLoopMode The run loop mode in which to perform the async read
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		exactLength: (size_t)length
		runLoopMode: (of_run_loop_mode_t)runLoopMode;

# ifdef OF_HAVE_BLOCKS
/**
 * @brief Asynchronously reads *at most* ref size bytes from the stream into a
 *	  buffer.
 *
 * On network streams, this might read less than the specified number of bytes.

 *		If the block returns true, it will be called again with the same
 *		buffer and maximum length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		     length: (size_t)length
		      block: (of_stream_async_read_block_t)block;

/**
 * @brief Asynchronously reads *at most* ref size bytes from the stream into a
 *	  buffer.
 *
 * On network streams, this might read less than the specified number of bytes.
 * If you want to read exactly the specified number of bytes, use

 *		If the block returns true, it will be called again with the same
 *		buffer and maximum length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		     length: (size_t)length
		runLoopMode: (of_run_loop_mode_t)runLoopMode
		      block: (of_stream_async_read_block_t)block;

/**
 * @brief Asynchronously reads exactly the specified length bytes from the
 *	  stream into a buffer.
 *
 * Unlike @ref asyncReadIntoBuffer:length:block:, this method does not invoke
 * the block when less than the specified length has been read - instead, it

 *		If the block returns true, it will be called again with the same
 *		buffer and exact length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		exactLength: (size_t)length
		      block: (of_stream_async_read_block_t)block;

/**
 * @brief Asynchronously reads exactly the specified length bytes from the
 *	  stream into a buffer.
 *
 * Unlike @ref asyncReadIntoBuffer:length:block:, this method does not invoke
 * the block when less than the specified length has been read - instead, it

 *		If the block returns true, it will be called again with the same
 *		buffer and exact length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		exactLength: (size_t)length
		runLoopMode: (of_run_loop_mode_t)runLoopMode
		      block: (of_stream_async_read_block_t)block;
# endif
#endif

/**
 * @brief Reads a uint8_t from the stream.
 *
 * @warning Only call this when you know that enough data is available!

 *	    Otherwise you will get an exception!
 *
 * @param encoding The encoding of the string to read from the stream
 * @param length The length (in bytes) of the string to read from the stream
 * @return A string with the specified length
 */
- (OFString *)readStringWithLength: (size_t)length
			  encoding: (of_string_encoding_t)encoding;

/**
 * @brief Reads until a newline, `\0` or end of stream occurs.
 *
 * @return The line that was read, autoreleased, or `nil` if the end of the
 *	   stream has been reached.
 */
- (nullable OFString *)readLine;

/**
 * @brief Reads with the specified encoding until a newline, `\0` or end of
 *	  stream occurs.
 *
 * @param encoding The encoding used by the stream
 * @return The line that was read, autoreleased, or `nil` if the end of the
 *	   stream has been reached.
 */
- (nullable OFString *)readLineWithEncoding: (of_string_encoding_t)encoding;

#ifdef OF_HAVE_SOCKETS
/**
 * @brief Asynchronously reads until a newline, `\0`, end of stream or an
 *	  exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 */
- (void)asyncReadLine;

/**
 * @brief Asynchronously reads with the specified encoding until a newline,
 *	  `\0`, end of stream or an exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param encoding The encoding used by the stream
 */
- (void)asyncReadLineWithEncoding: (of_string_encoding_t)encoding;

/**
 * @brief Asynchronously reads with the specified encoding until a newline,
 *	  `\0`, end of stream or an exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param encoding The encoding used by the stream
 * @param runLoopMode The run loop mode in which to perform the async read
 */
- (void)asyncReadLineWithEncoding: (of_string_encoding_t)encoding
		      runLoopMode: (of_run_loop_mode_t)runLoopMode;

# ifdef OF_HAVE_BLOCKS
/**
 * @brief Asynchronously reads until a newline, `\0`, end of stream or an
 *	  exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param block The block to call when the data has been received.
 *		If the block returns true, it will be called again when the next
 *		line has been received. If you want the next block in the queue
 *		to handle the next line, you need to return false from the
 *		block.
 */
- (void)asyncReadLineWithBlock: (of_stream_async_read_line_block_t)block;

/**
 * @brief Asynchronously reads with the specified encoding until a newline,
 *	  `\0`, end of stream or an exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param encoding The encoding used by the stream
 * @param block The block to call when the data has been received.
 *		If the block returns true, it will be called again when the next
 *		line has been received. If you want the next block in the queue
 *		to handle the next line, you need to return false from the
 *		block.
 */
- (void)asyncReadLineWithEncoding: (of_string_encoding_t)encoding
			    block: (of_stream_async_read_line_block_t)block;

/**
 * @brief Asynchronously reads with the specified encoding until a newline,
 *	  `\0`, end of stream or an exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param encoding The encoding used by the stream
 * @param runLoopMode The run loop mode in which to perform the async read
 * @param block The block to call when the data has been received.
 *		If the block returns true, it will be called again when the next
 *		line has been received. If you want the next block in the queue
 *		to handle the next line, you need to return false from the
 *		block.
 */
- (void)asyncReadLineWithEncoding: (of_string_encoding_t)encoding
		      runLoopMode: (of_run_loop_mode_t)runLoopMode
			    block: (of_stream_async_read_line_block_t)block;
# endif
#endif

/**
 * @brief Tries to read a line from the stream (see @ref readLine) and returns
 *	  `nil` if no complete line has been received yet.
 *

 *	  @ref readLineWithEncoding:) and returns `nil` if no complete line has
 *	  been received yet.
 *
 * @param encoding The encoding used by the stream
 * @return The line that was read, autoreleased, or `nil` if the line is not
 *	   complete yet
 */
- (nullable OFString *)tryReadLineWithEncoding: (of_string_encoding_t)encoding;

/**
 * @brief Reads until the specified string or `\0` is found or the end of
 *	  stream occurs.
 *
 * @param delimiter The delimiter
 * @return The line that was read, autoreleased, or `nil` if the end of the

 *
 * @param delimiter The delimiter
 * @param encoding The encoding used by the stream
 * @return The line that was read, autoreleased, or `nil` if the end of the
 *	   stream has been reached.
 */
- (nullable OFString *)readTillDelimiter: (OFString *)delimiter
				encoding: (of_string_encoding_t)encoding;

/**
 * @brief Tries to reads until the specified string or `\0` is found or the end
 *	  of stream (see @ref readTillDelimiter:) and returns `nil` if not
 *	  enough data has been received yet.
 *
 * @param delimiter The delimiter

 *
 * @param delimiter The delimiter
 * @param encoding The encoding used by the stream
 * @return The line that was read, autoreleased, or `nil` if the end of the
 *	   stream has been reached.
 */
- (nullable OFString *)tryReadTillDelimiter: (OFString *)delimiter
				   encoding: (of_string_encoding_t)encoding;

/**
 * @brief Writes everything in the write buffer to the stream.
 */
- (void)flushWriteBuffer;

/**

 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param data The data which is written into the stream
 * @param runLoopMode The run loop mode in which to perform the async write
 */
- (void)asyncWriteData: (OFData *)data
	   runLoopMode: (of_run_loop_mode_t)runLoopMode;

/**
 * @brief Asynchronously writes a string in UTF-8 encoding into the stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *

 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param encoding The encoding in which the string should be written to the
 *		   stream
 */
- (void)asyncWriteString: (OFString *)string
		encoding: (of_string_encoding_t)encoding;

/**
 * @brief Asynchronously writes a string in the specified encoding into the
 *	  stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param encoding The encoding in which the string should be written to the
 *		   stream
 * @param runLoopMode The run loop mode in which to perform the async write
 */
- (void)asyncWriteString: (OFString *)string
		encoding: (of_string_encoding_t)encoding
	     runLoopMode: (of_run_loop_mode_t)runLoopMode;

# ifdef OF_HAVE_BLOCKS
/**
 * @brief Asynchronously writes data into the stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param data The data which is written into the stream
 * @param block The block to call when the data has been written. It should
 *		return the data for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteData: (OFData *)data
		 block: (of_stream_async_write_data_block_t)block;

/**
 * @brief Asynchronously writes data into the stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param data The data which is written into the stream
 * @param runLoopMode The run loop mode in which to perform the async write
 * @param block The block to call when the data has been written. It should
 *		return the data for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteData: (OFData *)data
	   runLoopMode: (of_run_loop_mode_t)runLoopMode
		 block: (of_stream_async_write_data_block_t)block;

/**
 * @brief Asynchronously writes a string into the stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param block The block to call when the string has been written. It should
 *		return the string for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteString: (OFString *)string
		   block: (of_stream_async_write_string_block_t)block;

/**
 * @brief Asynchronously writes a string in the specified encoding into the
 *	  stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param encoding The encoding in which the string should be written to the
 *		   stream
 * @param block The block to call when the string has been written. It should
 *		return the string for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteString: (OFString *)string
		encoding: (of_string_encoding_t)encoding
		   block: (of_stream_async_write_string_block_t)block;

/**
 * @brief Asynchronously writes a string in the specified encoding into the
 *	  stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param encoding The encoding in which the string should be written to the
 *		   stream
 * @param runLoopMode The run loop mode in which to perform the async write
 * @param block The block to call when the string has been written. It should
 *		return the string for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteString: (OFString *)string
		encoding: (of_string_encoding_t)encoding
	     runLoopMode: (of_run_loop_mode_t)runLoopMode
		   block: (of_stream_async_write_string_block_t)block;
# endif
#endif

/**
 * @brief Writes a uint8_t into the stream.
 *
 * @param int8 A uint8_t

 * @brief Writes a string into the stream in the specified encoding, without
 *	  the trailing zero.
 *
 * @param string The string from which the data is written to the stream
 * @param encoding The encoding in which to write the string to the stream
 * @return The number of bytes written
 */
- (size_t)writeString: (OFString *)string
	     encoding: (of_string_encoding_t)encoding;

/**
 * @brief Writes a string into the stream with a trailing newline.
 *
 * @param string The string from which the data is written to the stream
 * @return The number of bytes written
 */
- (size_t)writeLine: (OFString *)string;

/**
 * @brief Writes a string into the stream in the specified encoding with a
 *	  trailing newline.
 *
 * @param string The string from which the data is written to the stream
 * @param encoding The encoding in which to write the string to the stream
 * @return The number of bytes written
 */
- (size_t)writeLine: (OFString *)string
	   encoding: (of_string_encoding_t)encoding;

/**
 * @brief Writes a formatted string into the stream.
 *
 * See printf for the format syntax. As an addition, `%@` is available as
 * format specifier for objects, `%C` for `of_unichar_t` and `%S` for
 * `const of_unichar_t *`.
 *
 * @param format A string used as format
 * @return The number of bytes written
 */
- (size_t)writeFormat: (OFConstantString *)format, ...;

/**
 * @brief Writes a formatted string into the stream.
 *
 * See printf for the format syntax. As an addition, `%@` is available as
 * format specifier for objects, `%C` for `of_unichar_t` and `%S` for
 * `const of_unichar_t *`.
 *
 * @param format A string used as format
 * @param arguments The arguments used in the format string
 * @return The number of bytes written
 */
- (size_t)writeFormat: (OFConstantString *)format arguments: (va_list)arguments;