ObjFW  Diff

 *	  stream.
 *
 * @param length The length of the data that has been read
 * @param exception An exception which occurred while reading or `nil` on
 *		    success
 * @return A bool whether the same block should be used for the next read
 */
typedef bool (^of_stream_async_read_block_t)(size_t length,
    id _Nullable exception);

/**
 * @brief A block which is called when a line was read asynchronously from a
 *	  stream.
 *
 * @param line The line which has been read or `nil` when the end of stream
 *	       occurred
 * @param exception An exception which occurred while reading or `nil` on
 *		    success
 * @return A bool whether the same block should be used for the next read
 */
typedef bool (^of_stream_async_read_line_block_t)(OFString *_Nullable line,
    id _Nullable exception);

/**
 * @brief A block which is called when data was written asynchronously to a
 *	  stream.
 *
 * @param data The data which was written to the stream
 * @param bytesWritten The number of bytes which have been written. This
 *		       matches the length of the specified data on the
 *		       asynchronous write if no exception was encountered.
 * @param exception An exception which occurred while writing or `nil` on
 *		    success
 * @return The data to repeat the write with or nil if it should not repeat
 */
typedef OFData *_Nullable (^of_stream_async_write_data_block_t)(
    OFData *_Nonnull data, size_t bytesWritten, id _Nullable exception);

/**
 * @brief A block which is called when a string was written asynchronously to a
 *	  stream.
 *
 * @param string The string which was written to the stream
 * @param bytesWritten The number of bytes which have been written. This
 *		       matches the length of the specified data on the
 *		       asynchronous write if no exception was encountered.
 * @param exception An exception which occurred while writing or `nil` on
 *		    success
 * @return The string to repeat the write with or nil if it should not repeat
 */
typedef OFString *_Nullable (^of_stream_async_write_string_block_t)(
    OFString *_Nonnull string, size_t bytesWritten, id _Nullable exception);
#endif

/**
 * @protocol OFStreamDelegate OFStream.h ObjFW/OFStream.h
 *
 * A delegate for OFStream.

 *		If the block returns true, it will be called again with the same
 *		buffer and maximum length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		     length: (size_t)length
		      block: (of_stream_async_read_block_t)block;

/**
 * @brief Asynchronously reads *at most* ref size bytes from the stream into a
 *	  buffer.
 *
 * On network streams, this might read less than the specified number of bytes.
 * If you want to read exactly the specified number of bytes, use

 *		buffer and maximum length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		     length: (size_t)length
		runLoopMode: (of_run_loop_mode_t)runLoopMode
		      block: (of_stream_async_read_block_t)block;

/**
 * @brief Asynchronously reads exactly the specified length bytes from the
 *	  stream into a buffer.
 *
 * Unlike @ref asyncReadIntoBuffer:length:block:, this method does not invoke
 * the block when less than the specified length has been read - instead, it

 *		If the block returns true, it will be called again with the same
 *		buffer and exact length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		exactLength: (size_t)length
		      block: (of_stream_async_read_block_t)block;

/**
 * @brief Asynchronously reads exactly the specified length bytes from the
 *	  stream into a buffer.
 *
 * Unlike @ref asyncReadIntoBuffer:length:block:, this method does not invoke
 * the block when less than the specified length has been read - instead, it

 *		buffer and exact length when more data has been received. If
 *		you want the next block in the queue to handle the data
 *		received next, you need to return false from the block.
 */
- (void)asyncReadIntoBuffer: (void *)buffer
		exactLength: (size_t)length
		runLoopMode: (of_run_loop_mode_t)runLoopMode
		      block: (of_stream_async_read_block_t)block;
# endif
#endif

/**
 * @brief Reads a uint8_t from the stream.
 *
 * @warning Only call this when you know that enough data is available!

 *
 * @param block The block to call when the data has been received.
 *		If the block returns true, it will be called again when the next
 *		line has been received. If you want the next block in the queue
 *		to handle the next line, you need to return false from the
 *		block.
 */
- (void)asyncReadLineWithBlock: (of_stream_async_read_line_block_t)block;

/**
 * @brief Asynchronously reads with the specified encoding until a newline,
 *	  `\0`, end of stream or an exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param encoding The encoding used by the stream
 * @param block The block to call when the data has been received.
 *		If the block returns true, it will be called again when the next
 *		line has been received. If you want the next block in the queue
 *		to handle the next line, you need to return false from the
 *		block.
 */
- (void)asyncReadLineWithEncoding: (OFStringEncoding)encoding
			    block: (of_stream_async_read_line_block_t)block;

/**
 * @brief Asynchronously reads with the specified encoding until a newline,
 *	  `\0`, end of stream or an exception occurs.
 *
 * @note The stream must conform to @ref OFReadyForReadingObserving in order
 *	 for this to work!
 *
 * @param encoding The encoding used by the stream
 * @param runLoopMode The run loop mode in which to perform the async read
 * @param block The block to call when the data has been received.
 *		If the block returns true, it will be called again when the next
 *		line has been received. If you want the next block in the queue
 *		to handle the next line, you need to return false from the
 *		block.
 */
- (void)asyncReadLineWithEncoding: (OFStringEncoding)encoding
		      runLoopMode: (of_run_loop_mode_t)runLoopMode
			    block: (of_stream_async_read_line_block_t)block;
# endif
#endif

/**
 * @brief Tries to read a line from the stream (see @ref readLine) and returns
 *	  `nil` if no complete line has been received yet.
 *

 *
 * @param data The data which is written into the stream
 * @param block The block to call when the data has been written. It should
 *		return the data for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteData: (OFData *)data
		 block: (of_stream_async_write_data_block_t)block;

/**
 * @brief Asynchronously writes data into the stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param data The data which is written into the stream
 * @param runLoopMode The run loop mode in which to perform the async write
 * @param block The block to call when the data has been written. It should
 *		return the data for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteData: (OFData *)data
	   runLoopMode: (of_run_loop_mode_t)runLoopMode
		 block: (of_stream_async_write_data_block_t)block;

/**
 * @brief Asynchronously writes a string into the stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param block The block to call when the string has been written. It should
 *		return the string for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteString: (OFString *)string
		   block: (of_stream_async_write_string_block_t)block;

/**
 * @brief Asynchronously writes a string in the specified encoding into the
 *	  stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param encoding The encoding in which the string should be written to the
 *		   stream
 * @param block The block to call when the string has been written. It should
 *		return the string for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteString: (OFString *)string
		encoding: (OFStringEncoding)encoding
		   block: (of_stream_async_write_string_block_t)block;

/**
 * @brief Asynchronously writes a string in the specified encoding into the
 *	  stream.
 *
 * @note The stream must conform to @ref OFReadyForWritingObserving in order
 *	 for this to work!
 *
 * @param string The string which is written into the stream
 * @param encoding The encoding in which the string should be written to the
 *		   stream
 * @param runLoopMode The run loop mode in which to perform the async write
 * @param block The block to call when the string has been written. It should
 *		return the string for the next write with the same callback or
 *		nil if it should not repeat.
 */
- (void)asyncWriteString: (OFString *)string
		encoding: (OFStringEncoding)encoding
	     runLoopMode: (of_run_loop_mode_t)runLoopMode
		   block: (of_stream_async_write_string_block_t)block;
# endif
#endif

/**
 * @brief Writes a uint8_t into the stream.
 *
 * @param int8 A uint8_t